SenSmart 3000 User's Manual
Document: UM-1003
Revision Level B
13
Figure 2-11: SenSmart 3000 Block / Wiring Diagram
SECTION 3
– INITIAL START-UP
3.1
“Transmitter Configuration” Menu
Figure 3-1shows the SenSmart 3000 XMITTER CONFIG menu used to activate channels,
precisely calibrate 4-20mA outputs and set time / date. Its menus are set at the factory and
typically not needed by the user. To access from any data display, press and hold the NEXT key
for 5-seconds until the screen appears requesting a special key sequence (4-UP keystrokes).
