background image

Thank you for purchasing the RC Logger 
Vantage FPV Headset. We hope that you 
will fully enjoy the immersive experience 
of the first person view world.  

The Vantage headset is light weight and 
super comfortable. Offering a 5" monitor, 
floating  rear  mounted  battery  pouch  for 
optimum weight distribution, soft sponge 
rubber  facial  foam  liner  and  a  one  piece 
plastic molded shell with space for those 
with  prescription  glasses,  the  headset 

With the A/V 3.5mm input the Vantage Headset can also be used as a stand alone 
unit. The monitor can receive signal from any device you'd like that supports video 
out. So if you already have your own equipment, such as a 5.8GHz video receiver, 
you  can  simply  plug  into  the  headset  for  the  same  immersive  experience.  If  you 
are looking for a complete 5.8GHz package please check our website for our RC 
Logger  Vantage  FPV  Headset  5.8GHz  combo  package,  that  features  our  RC 
Logger 5.8GHz Video RX Module. 

Get ready, you are about to experience pure #DRONEsomeness! 

Introduction

Maximum Operating Hour:  3 hrs

 

Working hand in hand with our Xtreme V2 

radio's output port, it's an immediate plug and play experience. 

packs in a lot of well thought out details. 

Product dimensions:  187(L) x 179(W) x 107(H)mm

Lipo Battery

Capacity:  1500mAH

Voltage:  2 x 3.7V
Maximum Charging Voltage:  4.2V
Energy:  2 x 5.55Wh

Summary of Contents for Vantage 89153RC













Reviews: