RC Logger Vantage 89153RC, Instruction Manual

Page: 8 / 12

5) OSD’s Vertical Position
When “MENU VP” is shown on OSD, press the “+” or “-” button to adjust the
vertical position of OSD. After adjusting the OSD position, it will be saved
automatically.
There are 12 adjustable vertical levels. “1" is at the bottom. “12" is at the top.
Below are some examples:
6) Reset
When “RESET” is shown on OSD, press the “+” or “-” button to restore factory
default screen setting. After pressing “+” or “-” the screen will show “RESET OK”
in red color, meaning default screen setting is restored.
Factory default setting is “1" (at the bottom)
Remark: After pressing the MENU button, if no buttons are pressed
within 3 seconds, the display will auto-exit OSD settings.