FenixS– user’s manual
Document Revision: 1.0
September 2021
4.3 Take-off info page
The
Take-off
page display the flight data from the last known take-off point. Yellow dot and line
will represent the direction to where the last know take-off point was detected.
To change range of displayed distance, short press on rotary knob must be made. Current zoom
indicator will be colored red. To change to required zoom, pilot must turn rotary knob CW to
zoom in or CCW to zoom out. With selected range, the pilot must short press on the rotary
knob to confirm this action.
1
Figure 35: Reference view of the Take-off page.
2
3
5
4
6
Description:
1.
Displayed name of the info page.
2.
Last take-off position.
3.
Pilot position.
4.
FG information to the takeoff position.
5.
Navbox data.
6.
Current zoom of the displayed distance
(can be selected from 1 to 30).
Additional navbox data can be seen on the right side of the display. Data will give the pilot an
easier representation of the current flight bearing, flight direction, and flight efficiency.
35
