FenixS– user’s manual
Document Revision: 1.0
September 2021
To change range of displayed radar, long press on rotary knob must be made to enter the Flarm
sub-menu. Once in the Flarm sub-menu, the following function will displayed:
Zoom –
selecting will enable the pilot to change displayed range of the radar. Pilot
must turn rotary knob CW to zoom in or CCW to zoom out. With selected range, the
pilot must short press on the rotary knob to confirm this action.
Details –
selecting will display all information of the currently selected glider. If a glider
with the unknown details is selected, the pilot can manually insert parameters in the
FenixS unit. Parameters will then be saved.
Exit –
will return back to Flarm radar page.
1
Figure 34: Reference view of Flarm radar page.
2
3
5
4
6
Description:
1.
Displayed type of the selected glider.
2.
Currently selected glider marked by yellow arrow.
3.
Objects on near same height are colored white.
4.
A higher flying glider displayed with blue arrow.
5.
Additional information of the currently selected glider.
6.
Currently displayed range of the flarm radar
(can be selected from 1 to 9).
34
