FenixN – user’s manual
Document Revision: 1.5.B50
January 2022
3.10.2.6 Data port
Working configuration of the external data ports is set in subpage
Data port.
The pilot can set
and enable or disable following parameters:
Data port 1 –
parameter to set communication speed between the FenixN system data
port 1 and the externally connected device.
This connector is based on indicator unit
and settings are for it!
The following speeds can be chosen:
o
BR9600
o
BR19200
o
BR38400
o
BR57600
o
BR115200
Data port 2 –
parameter to set communication speed between the FenixN data port 2
and the externally connected device. The following speeds can be chosen:
o
BR9600
o
BR19200
o
BR38400
o
BR57600
o
BR115200
Radio –
selecting radio on the list, will set the same communication baud-rate of the
data port 1 as-is for the connected radio.
GPGGA –
enabling this parameter, the GPS GPGGA sentence will be sent every second
through data port 1.
GPRMC –
enabling this parameter, the GPS GPRMC sentence will be sent every second
through data port 1.
GPRMB –
enabling this parameter, the GPS GPRMB sentence will be sent every second
through data port 1.
PFLAx –
enabling this parameter, the FLARM sentence will be sent every second through
data port 1.
55
Data port sub-page reference.
