Wind and
connectivity status
view.
FenixN – user’s manual
Document Revision: 1.5.B50
January 2022
3.1.2 Flight mode
Navigation data is separately set for both flight modes. Device will detect the mode of flight and
switch view mode of all informational positions on screens. The status icon at bottom right of
the vario screen always indicates the current detected flight mode.
Displaying that device is currently in thermal flight mode.
3.1.3 Needle unit’s
Main needle units can be view at the bottom right side of the main screen. Selection can be
made between
m/s
or
kts
.
Vario units in m/s.
Vario units in kts.
3.1.4 Wind and connectivity status
A small section of the main screen is used to constantly display wind information and the status
icons. For the pilot, wind information includes values of wind direction and speed. These values
are represented graphically and numerically in a small half circle on the left side center of the
main screen.
Wind indication features:
Wind direction –
pointer, to show wind direction relative to current
track.
Wind speed –
displayed numerically in the selected user unit.
Wind absolute direction –
displayed numerically in degrees.
Connectivity status icons represent current mode of GPS reception, Flarm
and Bluetooth module. Every module has its own represented icon.
Flarm and Bluetooth connections are fully operating if icons are
displayed. For GPS reception, green color will indicate 3D mode, while red
will indicate no GPS fix.
17
Displaying that device is currently in glide flight mode.
