background image

© Copyright 2010 RBD Instruments, Inc.

Limited Warranty

RBD Instruments, Inc. (referred to as “Company”) warrants that the product(s) discussed in this document 

will perform substantially in accordance with the accompanying written materials, and will be free from 

defects in materials and workmanship for the period of one year from receipt by buyer. In the event 

applicable law imposes any implied warranties, the implied warranty period is limited to 90 days from the 

date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the 

above limitation may not apply to the buyer.

Other than as described here, there are no other expressed or implied warranties.

Customer Remedies 

The Company’s and its suppliers’ entire liability and Customer’s exclusive remedy shall be the repair or 

replacement of the product that does not meet this Limited Warranty. This Limited Warranty is void if 

failure of the product has resulted from accident, abuse, modification, or misapplication of the product(s). 

Any replacement product will be warranted for the remainder of the original warranty period or 90 days, 

whichever is longer.

No Other Warranties

To the maximum extent permitted by applicable law, the Company and its suppliers disclaim all other 

warranties, either express or implied, including, but not limited to implied warranties of merchantability 

and fitness for a particular purpose. This limited warranty gives customer specific legal rights. Customer 

may have other rights depending on the jurisdiction.

No Liability for Damages 

To the maximum extent permitted by applicable law, in no event shall the Company or its suppliers 

be liable for any damages whatsoever (including without limitation, special, incidental, consequential, 

or indirect damages for personal injury, loss of business profits, business interruption, loss of

 

business 

information, or any other pecuniary loss) arising out of the use of or inability to use this product, even 

if the Company has been advised of the possibility of such damages. In any case, the Company’s and its 

suppliers’ entire liability under any provision of this agreement shall be limited to the amount actually paid 

by the buyer. 
In addition, this warranty does not cover loss, damage, or defects that result from transportation to buyer, 

improper care by buyer, buyer-supplied software or other components, unauthorized changes, use, or 

misuse (including, but not limited to, use outside of the specified environmental conditions).

Page  iv

Summary of Contents for UVB-100


























Reviews: