System Setup : Unpacking and Handling
© Copyright 2010 RBD Instruments, Inc.
System Setup
This chapter provides information on setting up your UVB-100 components. This includes:
•
Information about inspecting the packaging for damage
•
Instructions for the unpacking and handling of the UVB-100 components
•
Checkout procedures for the UVB-100 components
Unpacking and Handling
The packaging RBD Instruments uses when shipping components is designed to withstand the demands of
normal shipping activities. However, once the boxes leave our facility, their treatment is out of our control.
Inspect the inner packaging and components as soon as possible so that you can report any necessary
damage claims in a timely manner with the shipping company used. This is especially important when
there is evidence of mishandling on the outside container.
Warning!
Wear protective latex gloves whenever handling the UVB-100 Emitter. The oils on your hands
and fingers can adversely affect the performance of the emitter and could create a hazardous condition. If
the emitter lamp does come into contact with bare skin, carefully wipe the lamp with Isopropyl alcohol.
Once you have confirmed that all components have arrived intact, verify that you have the following items.
If any are missing, please contact RBD Instruments at 541-330-0723 or e-mail us at tech@rbdinstruments.
com.
•
UVB-100 Emitter Assembly(ies)
•
UVB-100 Control
•
UVB-100
SHV
Cable Assembly(ies)
•
UVB-100 AC Power Cable
•
Protective eye goggles
• Gasket(s) for the flange(s) into which the UVB-100 Emitter Assembly(ies) will be mounted
•
UVB-100 Safety Information envelope (which includes the key for the UVB-100 Control); this must
always be available when the UVB-100 is being used
•
UVB-100 Operation Manual (this document must
always
be available when the UVB-100 is being used)
Installing UVB-100 Components
This chapter provides instructions for installing all UVB-100 components. This includes:
•
Installing the UVB-100 Emitter Assembly on your vacuum chamber
• Installing the UVB-100 Control in your system’s electronics rack.
Page 6
