UVB-100 Introduction : UVB-100 Control
© Copyright 2010 RBD Instruments, Inc.
UVB-100 Control
The UVB-100 Control provides all the necessary voltages and currents required to operate the UVB-100
emitter. One UVB-100 Control can operate up to two UVB-100 Emitter Assemblies.
UVB-100 Control Specifications, Switches, and Meters
Specification
Description
Input Power
90-264 VAC @ 47-63 Hz, Single Phase
Output Power
2
0 W per standard Emitter Assembly; up to two Emitter
Assemblies per UVB-100 Controller.
Dimensions
19
"
rack mount x 12
"
deep x 3
"
high
Front Panel Controls
Description/Function
Key Lock and Switch
Turns on the UVB-100 Control power. This key should be
stored in a secure location (for example, under the control
of the person who is responsible for its safe-keeping or
with your safety department) when the UVB-100 is not
in use. Always follow all safety protocols for UV-C when
operating the UVB-100.
Manual Override
Turns on the UVB-100 Emitter Assembly and disables the
Timer
Timer
Allows you to set the time during which the UVB-100
Emitter Assembly is on
Timer Start/Stop Switch
Starts and stops the time defined on the Timer
Hour Meter
Records the number of hours during which the UVB-100
Emitter Assembly has been on
Hour Meter Reset Switch
Resets the Hour Meter to 0 hours.
Back Panel Connections
Description/Function
Remote Input
Amphenol connector to allow for the connection of a
remote input device
Emitter Connection
6+9
Connectors for F1, F2
AC Power
AC Power Module with fuse
Page 3
