L39“Albatros“ 90mm edf
Pagina 21
Carefully line out the fuselage, do not glue yet (maybe only a drop of help glue here and there.
Now place the Horizontal and Vertical stabilizer temp in the openings (do not glue)
Line out the fuselage make sure all is straight rudder in line with the fuselage etc., maybe you have to
loosen a helpformers and push or pull here and there.
If that is ok then glue in the intake duct sides from 1,5 balsa and duct cut from paper
Now the fuselage starts to get stiff and ridged
Place some 3x6 anti collapse stringers to the intake duct.
