L39“Albatros“ 90mm edf
Pagina 3
Material you might need:
Balsa knife, Stanley knife, straightedge, building board 1700mm,
ca glue medium, thin, thick you need approx. for wing and vertical stabilizer sheeting 4 bottles
thick and 2 bottles medium for rib gluing,, fuselage 1 medium for formers … thick for sheeting
building nails, tape
Also use white glue, and canopy glue, epoxy for the canopy and cowls
Some drilling and bending tools, wire cutter, safety goggles etc. etc.
For finishing you need:
Glass 25 gram 3mtr and filler dope or PS100 or epoxy 1 litre, brushes sanding paper
60,120,180, paint of your choice
Wheels as on the drawing, controls, motor, battery etc.
All vacuumformings should be roughened up before gluing and primed before painting
Check the pictures for additional information; a picture says more as a 1000 words so do look
at the pictures on the cd
S
TUDY THE DRAWING AND PICTURES TO UNDERSTAND HOW THE
L39
A
LBATROSS BUILD
IMPORTANT!
DO MARK ALL PARTS ON THE CNC SHEETS AS PER DRAWING THERE ARE A LOT OF PARTS THAT ARE
LOOKING SIMILAR
,
SO MARK THEM CLEAR AS TO THE DRAWING
Vertical stabilizer
Layouts parts and assemble step by step the stab and rudder. Use the feet on the ribs
Make up the sheeting as per plan see the drawing
