18
When installing or changing blade observe the proper rotation and be sure
blade matches the rotation arrow. Use scrap wood to block blade while
tightening or loosening blade retaining screw. Blade retaining screw has left
hand threads the direction for tightening and loosening is opposite from
normal screws and bolts. To loosen blade screw turn wrench in same
direction as rotation of blade, clockwise when looking at the blade. Remove
retaining screw and blade arbor plate to free saw blade from motor shaft. Do
not remove rear arbor plate, check blade brake for dust buildup, clean if
necessary.
Blade brake cylinder
attachment, clean this
area at blade change
Check brake
lining for wear
Summary of Contents for Cyclone
Page 2: ...1 ...
