background image

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. 

Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during 

shipping. Because the Pocket Mod was 95 percent assembled and packed at the factory, there should not be any 

problems, even if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. 

Allow up to 15 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for initial charge (see page 3 for charging information).

 BEFORE YOU BEGIN

2

       WARNING:

  

DO NOT USE NON-RAZOR 
PRODUCTS WITH YOUR 
RAZOR POCKET MOD.

  

The Pocket Mod has been built to 

certain Razor design specifications. 

The original equipment supplied at 

the time of sale was selected on 

the basis of its compatibility with 

the frame, fork and all other parts. 

Certain aftermarket products may 

or may not be compatible.

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only 

as a last resort.

Need Help?

 Visit our web site for updates and a list of authorized service centers at 

www.razor.com

 

or call toll-free at 

866-467-2967 

Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

5mm hexagonal 

 key wrench

(included)

Bicycle-style tire pump 

for Schrader valve tires, 

with pressure gauge

Kick Stand

Charger

Brake Lever

Brake Lever

Adjuster

Chain Guard

Speed Control

Front Fork

Charger 

Plug 

Charger 

Port

Tire

Front Wheel

On/Off 

Switch

Charger 

Port

Storage Compartment 

Under Seat

Summary of Contents for Pocket Mod Motor Scooter















Reviews: