HEADLINE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
7
USAGE
7
Wheels
Practice riding only in wide open areas clear from curbs,
parking blocks and other obstacles, including things you may
fall on or into if you lose your balance. Impacting the wheels
against any hard surface can damage the wheels. Wheels
are not covered under your limited warranty.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride.
Reference “Safety Warnings” on
pages 1 and 2 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved
safety helmet. Elbow pads, kneepads and wrist guards are
recommended. Always wear athletic shoes (lace-up shoes with
rubber soles) and keep shoelaces tied and out of the way of the
wheels, motor and drive system. NEVER RIDE BAREFOOTED OR
IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Storage
Prolonged exposure to UV rays, rain and the elements may
damage the enclosure materials, store indoors when not in use.
PRE-RIDE CHECKLIST
1
Pull hand levers up into a neutral
position (about 45 degrees). Switch
the Hovertrax or similar products’
power to the
ON
position.
4
To turn right, push down on the
left hand lever and pull up on the
right hand lever.
2
Push down on both hand levers to
move forward.
5
To turn left, push down on the
right hand lever and pull up on the
left hand lever.
6
To spin, push/pull hand levers
in opposite positions, one up, one
down and maintain those hand
lever positions. Return hand
levers to a neutral position (about
45 degrees) to end spinning action.
3
Pull up on both hand levers to
move backwards and stop.
HOW TO RIDE
• Make sure power on Hovertrax or similar products (not included) is
OFF
. Make sure to read and follow instruction
manual warnings for your Hovertrax and similar products (not included).
• Make sure Hovertrax Kart is on a flat surface and not on an incline.
• Sit on the Hovertrax Kart and place feet on the foot rests.
WARNING:
When riding,
both feet must be placed securely on
foot rests.
WARNING:
Keep your
fingers and other body parts
away from the motor, steering
system, wheels and all other
moving components.