BEFORE YOU BEGIN
3
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches or dents that may have occurred during shipping. Because the Hovertrax
Kart was partially assembled and packed at the factory, there should not be any problems, even if the box has a few
scars or dents.
Estimated Set-Up Time
Allow up to 10 minutes for assembly.
WARNING:
DO NOT USE
NON-RAZOR PARTS WITH YOUR
PRODUCT. The Hovertrax Kart
has been built to certain Razor
design specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame and
all other parts. Certain aftermarket
components may not be compatible
and will void the warranty.
Product ID Locations:
(See locations to the left)
1. Frame (Underneath Product)
2. Box - Side of UPC (Not shown)
Plastic Bag Contents:
• Owner’s Manual
• 5 mm/6 mm Allen Wrench
• Button Head Screws with Washers
• Socket Head Screws
• Adjustment Knob
• Straps
Required Tools, Parts and Hardware
5 mm/6 mm Allen Wrench (included)
Adjustment Knob (included)
Two (2) Straps (included)
Two (2) Button Head Screws with
Washers (included)
Four (4) Socket Head
Screws (included)
Flag
Seat
Hovertrax and similar
products (Not Included)
Front Wheel
Foot Rests (Left/Right)
1.
Hand Levers (Left/Right)
Adjustment Knob