HEADLINE
6
ASSEMBLY AND SET UP
6
4
Hook straps to the front of the left and right hand
lever brackets. Pass straps under the Hovertrax and
similar products (not included).
Note: Straps may be easier to install if Hovertrax
Kart and Hovertrax and similar products are
upside down.
3
Once hand lever brackets are placed over the
Hovertrax and similar products’ foot platforms, push
sides of brackets together so that brackets are tightly
around Hovertrax and similar products’ foot platforms.
Using a 5 mm Allen wrench, tighten the button head
screws on the left and right hand lever brackets, so that
the Hovertrax Kart is securely attached to the Hovertrax
and similar products (not included).
5
Hook straps onto the back of the hand lever brackets.
Attaching the Hovertrax and Similar Products (not included) Continued
Required Tool:
5 mm Allen wrench (included)
Attaching the Flag
1
Assemble the flag as shown.
2
Insert flag into fixed hole located on seat.
Note:
Razor is not responsible for
any damage that may be caused
to your Razor Hovertrax or similar
product by use of the Hovertrax Kart
accessory kit.