ASSEMBLY AND SET UP
5
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Seat Assembly
Required Tool:
6 mm Allen wrench (included)
Align the four (4) holes in seat with the four (4) holes in
frame. Insert the four (4) socket head screws, included in
plastic bag, onto the seat and tighten securely with a 6
mm Allen wrench.
WARNING:
Failure to
properly install and tighten the
socket head screws that affix
seat can cause you to lose control
and crash.
Attaching the Hovertrax and Similar Products (not included)
Required Tool:
5 mm Allen wrench (included)
Turn Hovertrax and similar products power switch to the OFF position before attaching to the Hovertrax Kart.
2
Pull hand lever brackets wide enough apart to allow
Hovertrax Kart to be placed on to Hovertrax and similar
products’ (not included) foot platforms.
1
Using a 5 mm Allen wrench, loosen the button head
screws on the left and right hand lever brackets, so that
the brackets can be pulled to apart.
WARNING:
Failure to
properly install and tighten the button
head screws and straps that affix the
Hovertrax Kart to your Hovertrax and
similar products can cause you to lose
control and crash.