and
10/4/2010 (9:18 AM)
2034 - 1 - Safety v4.05
in
hen
e inspected periodically.
g
or to the
system. SET incoming air pressure from air
compressor between 80psi to 90psi. Set blasting
pressure regulator on the pot to desired blasting
pressure, normally between 25 psi - 35 psi.
supply with your cabinet, 150 grit Brown
Aluminum Oxide, MSDS information is provided
your information package.
1.5
Dust Collector -
The dust filter bags
inside the dust collector will require replacing w
they become worn or damaged. Accumulation of
dust inside the dust collector compartment is
evidence of bag damage. The dust collector
compartment should b
Dust escaping bags will exit exhaust blower
creating a possible respiratory hazard. Never Wash
bags to reuse always replace with new bags.
1.6
Pressure Pot
1.6.1
Failure to follow the procedures in this manual
could result in serious injury or death from the
sudden release of compressed air. NEVER attempt
to open the pressure pot closure mechanism usin
the Pressure Pot Closure Lever (L). This could
cause a sudden UNSAFE release of compressed air.
The pressure pot opens automatically when the pot
is depressurized. Never do maintenance on any
component of the pressure pot while the pot is
pressurized. Never apply more than 100psi of
incoming air pressure from the air compress
