Raytheon Anschütz Synapsis Conning NX Operator'S Manual Download Page 30

Page: 30 / 93

Synapsis Conning NX
Operation

____________________________________________________________________________________________________________________

Edition: 002

10000001045

Pos. No.

Designation

True Wind / Relative Wind (deg)
Wind value is displayed in degree.

True Wind / Relative Wind (kn)
Wind speed is displayed in knots.

True Drift / Relative Drift (deg)
Drift value is displayed in degree.

True Drift / Relative Drift (kn)
Drift speed is displayed in knots.

2.4.2

Depth

A graphic shows the depth of the last past minutes. The red line shows the depth alert
threshold, if enabled, see chapter 2.2.6.
The scaling of the graphic is adjustable by clicking on the graphic.
The current depth value is displayed numerically.

Figure 2-19

Depth Information

Summary of Contents for Synapsis Conning NX






























































































Search results

Summary of Contents for Synapsis Conning NX

Reviews:

Related manuals for Synapsis Conning NX

Brands by name

Popular brands

Raytheon Anschütz Synapsis Conning NX, Operator'S Manual

Search results

Summary of Contents for Synapsis Conning NX

Reviews:

Related manuals for Synapsis Conning NX

Brands by name

Popular brands