Synapsis Conning NX
Operation
___________________________________________________________________________________________________________________
43
2.5.3.1
Manually Input Sensor Data
If no sensor data for position or STW are available, the data can be entered manually.
Based on the inputted position and fix time, the system will use dead reckoning (if
configured) with available sensor data to calculate an approximate current position.
1.
Select the softkey
MANUAL
.
- The softkey
MANUAL
is only usable if there is no sensor data for the
corresponding data available.
-
2.
Select the corresponding input field to edit the data.
- The softkey
MANUAL
changes to
SET
.
3.
Select the softkey
SET
to save the changes.
Summary of Contents for Synapsis Conning NX
Page 4: ......
