Raytheon Anschütz ECDIS NX Compact, System Manual

Page: 32 / 53

ECDIS NX Compact
2 Installation
10000000559 22 Edition:001
Connector Description
Note
A USB extension cord is included with the delivery of ECDIS NX
Compact. Connect the extension cord to the USB 3.0 port and lead
the connector somewhere, where it is reachable after the installation
for later updates via USB.
USB 2.0 Input /
Output
Supports USB 2.0 compliant peripherals.
10+10 pin
RS-422 /
RS-485 NMEA
Module 1, 2, 3,
4, 5, 6, 7, 8
Connects peripheral devices, see chapter chapter 2.1.2.2.4 .
LAN 1, 2, 3, 4, 5
Input / Output
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair
cables CAT.5E. Make sure the network cable connector ”clicks” into
the RJ-45 connector.
Power Input
DC
Connect your DC power cable to the 2-pin Terminal Block 5.08 con-
nector. The internal DC power module supports 24 V DC.
Power Input
AC
The internal AC power module supports both 115VAC / 60Hz and
230VAC / 50Hz power input.
Note
The unit has a dual input power supply which will accept both AC and DC input. If
both inputs are connected, the unit will be powered by AC. If AC is disconnected it will
automatically switch over to DC without affecting the operation of the unit. This makes
it possible to use AC power as primary power and a 24V battery as secondary power,
eliminating the need for expensive UPS systems.
2.1.2.2.3 Connect IEC 61162-1 (NMEA 0183) PIN Allocation
8 RS422 / RS485 connection blocks are available to connect external devices. Each
connector is used for one external device. The connector pins are allocated as follows.