Raytheon Anschütz ECDIS NX Compact, System Manual

Page: 26 / 53

ECDIS NX Compact
2 Installation
10000000559 16 Edition:001
Fig. 6: Connector, Open Connector
2. Insert cables (from front) and screw / secure the cables by turning the screw on top of
the housing to securethe cables properly. Check that the cables is firmly in place and
do not appear loose or falls out when pulling gently.
Note
Note: Required polarization verification (for instance -/+ for DC power input) should
conform with the markings on the connector area of the unit. Ignoring the markings
on the unit or its add-on modules might damage the unit and/or external equipment in
which end, warranty will be void.
Fig. 7: Connector, Insert Cables
3. Plug the housing into the appropriate connector area of the unit (glass should be facing
down) and check again that the cables secured conforms with the markings on the
connector area of the unit.