47
Adjusting the Hi Delta Setpoint
Use the
MENU
key to scroll to the
SETUP/ADJUST
menu, then use the
ITEM
key to scroll to the
SET-
POINT
item. Adjust the Setpoint using the
UP
and
DOWN
arrow keys. Minimum setpoint for H, WH and
P models is 50
°
F, Maximum setpoint for H models is
220
°
F, for WH models 150
°
F. Maximum setpoint for P
models is 106
°
F.
View Menu
The
VIEW
menu is the default menu. It displays sen-
sor temperatures, the modulation rate of the blower,
heater cascade status, pump operation and CFH (Call
For Heat) information. Some of the items displayed
are mode specific and are only observable when its
corresponding mode is active.
User Interface
The user interface consists of several Menu options.
Press the
MENU
button to scroll through the different
menus in the interface. Press the
ITEM
button to scroll
through available items within a selected menu. And,
the
UP
and
DOWN
buttons allow for setting changes
to items in the
ADJUST
menu. Refer to Fig. 47 for dis-
play and key locations.
For detailed descriptions of the various screens, con-
sult the VERSA IC Control I&O Manual (Catalog
#5000.72).
Fig. 47: User Interface
Menu - Initial Adjustment
To change settings use the
MENU
key to scroll to the
SETUP/ADJUST
menu. The
ADJUST
menu allows
the installer to make adjustments to items shown in
Table P.
Refer to the VERSA IC Control I&O Manual (Catalog
#5000.72) for detailed setup instructions.
Summary of Contents for 992C
