3
Water Chemistry
(Corrosive water voids all warranties)
For your health and the protection of your pool equipment, it is essential that your water be chemically
balanced. The following levels must be used as a guide for balanced water.
Recommended Level(s) Fiberglass Pools Fiberglass Spas
Other Pool & Spa Types
Water Temp. (Deg. F)
68 to 88
89 to 104
68 to 104
pH
7.3 to 7.4
7.3 to 7.4
7.6 to 7.8
Total Alkalinity (PPM)
120 to 150
120 to 150
80 to 120
Calcium Hardness (PPM)
200 to 300
150 to 200
200 to 400
Salt (PPM)
4500 MAXIMUM
4500 MAXIMUM
4500 MAXIMUM
Free Chlorine (PPM)*
2 to 3
2 to 3
2 to 3
Total Dissolved Solids (PPM)
3000 MAXIMUM**
3000 MAXIMUM**
3000 MAXIMUM**
*Free Chlorine MUST NOT EXCEED 5 PPM!
**
In salt water chlorinated pools, the total TDS can be as high as 6000ppm.
• Occasional chemical shock dosing of the pool or spa water should not damage the heater providing
the water is balanced.
• Automatic chemical dosing devices and salt chlorinators are usually more efficient in heated water.
Unless controlled, they can lead to excessive chlorine level which can damage your heater.
• Further advice should be obtained from your pool or spa builder, accredited pool shop, or chemical
supplier for the correct levels for your water.
Summary of Contents for 5350 Series
