RAYN Installation Guide
Rosa 600 Luminaire
Adjust Tilt
When mounted using the provided hanging yoke, the luminaire can be tilted
up and down as needed.
Trunnion
Locking
Nuts (x2)
1. Loosen, but do not remove the
two trunnion locking nuts that
attach the yoke to the luminaire.
2. Tilt the luminaire to the desired
angle.
3. Tighten the trunnion locking nuts.
User Interface
The user interface is located behind the
removable panel on the end of the
luminaire.
Increment and
Decrement
User interface
(display)
Future use
Future use
Access the user interface to set the DMX start address of the luminaire.
After five seconds of inactivity when DMX is present, the display turns off.
The display will blink the DMX address when no DMX is present.
The DMX start address of the luminaire can also be set remotely via RDM
using the RAYN Touch lighting controller. See the
RAYN Touch Controller
User Manual
or online help system within the software for details.
Rosa 600 Luminaire
Page 9 of 12
RAYN Growing Systems
