Raymarine ST70 Instrument, User'S Reference Manual

Page: 24 / 48

18 ST70 Instrument User Reference Manual
Preliminary procedures
To carry out any seatrial calibration procedure, switch on the instrument, then when
an operational page is displayed:
1. Press
MENU
to select the Main Menu .
2. Use
<
or
>
to select Advanced Options.
3. Press
ENTER
to display the Advanced Options
menu
4. Use
<
or
>
to select the Transducer Setup
option, then press
ENTER
, to display the
Transducer Setup screen showing a search
initiation message.
5. Press
ENTER
again, to initiate a search for
transducers connected to the system.
When the search is complete, a
Search Results
page is displayed.
6. Press
ENTER
to display the Transducers found
menu.
7. If you have:
• A Wind transducer, carry out the Wind
transducer setup procedure below.
• A Speed transducer, carry out the Speed
calibration on page 20 .
Wind transducer setup
The wind transducer setup procedures are used to:
•
Linearize the vane.
• Align the vane.
• Calibrate the wind speed.
Linearization
1. To linearize the wind vane:.
1. With the
Transducers found menu displayed
(see Preliminary procedures on page 18 ), use
<
or
>
to scroll to the Wind option
2. Press
ENTER
to select the Wind transducer
setup menu.
D9780-1
Press ENTER to select.
Advanced Options
Transducer Setup
Press ENTER to continue
Search Results
Found:
D10064-1
1 Depth
1 Speed
1 Wind
i
If not correct, press CANCEL and
check connections.
D9781-1
Press ENTER to select.
Transducers found
Depth
i
Raymarine
Serial no. 100020
D9783-1
Press ENTER to select.
Transducers found
Wind
i
Raymarine
Serial no. 100030
81284_1.book Page 18 Friday, May 4, 2007 7:29 AM