Raymarine ST70 Instrument, User'S Reference Manual

Page: 22 / 48

16 ST70 Instrument User Reference Manual
4. Use
<
or
>
to select the required mode:
• Select ON if you want to set a value for variation. if you choose this mode, the
value you set will be applied to the rest of the system.
• Select OFF if you do not want to apply a variation value to the system.
• If SLAVE is displayed in the mode adjust box, the variation has been set at
another product in the system, and the value is shown in the lower adjust box.
In this mode, you cannot change the variation value.
5. If you selected the OFF or SLAVE mode, proceed from step 6. If you selected the
ON mode:
i. Press to select the lower (value) box.
ii. Use
<
or
>
to set the correct variation value.
6. Press
ENTER
to save the value and return to the Advanced Options menu.
7. Press
CANCEL
to return to the Main Menu .
Now proceed to Changing response rate .
Changing response rate
The response setting determines the rate at which data readings update. You can
adjust the response at each instrument, to best suit the conditions under which you
are operating. You can independently adjust the response at each instrument, for
individual data types.
If you want to change the response at any instrument:
1. With the
Main Menu displayed, use
<
or
>
to scroll to Display Settings.
2. Press
ENTER
to display the Display Settings
menu.
3. At the Display Settings menu, use
<
or
>
to scroll
to the Response option.
4. Press
ENTER
to display the Response menu,
then use
<
or
>
to scroll to the required data type
( Speed shown here).
Press ENTER to select
Display Settings
Response
i
Select display response
D10088-1
Press ENTER to select.
Response
Speed
D10090-1
81284_1.book Page 16 Friday, May 4, 2007 7:29 AM