ii
ST60 Graphic Display Operating Guide
CAUTION: Calibration requirement
The ST60 Graphic Display is calibrated to factory (default) settings
when first supplied. To ensure optimum performance on your boat, this
product must be setup before use. Do NOT use the product until it has
been setup using
the procedures in
Chapter 2, Preparation for Use
of the
ST60 Graphic Display Commissioning Guide
.
EMC conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment.
The design and manufacture of Raymarine equipment and accessories
conform to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance is
not compromised.
Product information
To the best of our knowledge, the information in this book and other product
documentation was correct when printed. However, our policy of continuous
product improvement and updating may change product specifications
without notice, so unavoidable differences may occur between the product
and the information supplied with it.
Raymarine cannot accept liability for inaccuracies or omissions in any
product documentation.
Warranty
To register your new Raymarine product, please take a few minutes to fill out
the warranty card. It is important that you complete the owner information
and return the card to the factory to receive full warranty benefits.
.
81226_1.book Page ii Wednesday, November 19, 2003 9:53 AM
