20
Required additional components
To complete your system, you will need the following components in addition to the
SPX core pack.
•
Autopilot controller (see
Autopilot controller
on
page 24
•
Drive unit (See
Drive unit
on
page 25
)
•
Power and drive cables (see
Power and drive cables
on
page 27
)
Optional additional components
•
Rudder reference -
SPX 10 only
(see
Rudder reference
on
page 38
)
•
Sleep switch (see
Sleep switch (optional)
on
page 39
)
•
External alarm (see
External alarm (optional)
on
page 39
)
•
Wind vane (See
Wind vane (sail boats)
on
page 39
)
3.2 Cable connection points and fuses
Cable connection points on the SPX 10, SPX 30 and SPX Solenoid vary slightly.
Throughout the following sets of instructions, refer to the diagrams below to see the
location of the various connections you will be using.
MADE IN HUNGARY
Raymarine Limited
GROUND
3029-632-E
POWER
POWER
POWER, 15 AMP
12V
OFF
ON
24V
FLUXGATE
RUDDER
CLUTCH
FAULT
SLEEP
FAULT
, 2 AMP
, 2 AMP
NMEA
MOTOR
A
B
SeaTalk
inputs/outputs
Rudder position
sensor inputs
D10444-1
SeaTalk
ng
inputs
SeaTalk
ng
power
switch
SeaTalk
ng
fuse (2 A)
SeaTalk
fuse (2 A)
Fluxgate
compass inputs
Sleep switch
inputs
NMEA
inputs/outputs
Clutch
voltage
switch
SPX 10
RF ground
connection
Power
inputs
Drive motor
outputs
Drive clutch
outputs
Power
fuse (15 A)
87072-2.book Page 20 Thursday, November 22, 2007 8:43 AM
