Chapter 4: Installing the SportPilot
43
4
In
st
all
in
g th
e S
po
rtP
ilo
t
4. Temporarily assemble the torque restraint to the cable holder.
5. Temporarily assemble the cable holder to the SportPilot using the
screws and washers.
6. Temporarily assemble the SportPilot to the steering shaft.
Do NOT tighten the retaining nut at this stage.
7. With the SportPilot aligned vertically and the control stalk
pointing to starboard, unfold the torque restraint so it sits firmly
against the bulkhead.
8. Assemble the torque bracket to the torque restraint.
9. Make sure that the lower edge of the torque bracket is level with
the bottom of the SportPilot.
D1374-2
Cable
holder
Torque
restraint
D1407- 2
Torque bracket
Torque restraint
Summary of Contents for SportPilot
