Chapter 4: Installing the SportPilot
31
4
In
st
all
in
g th
e S
po
rtP
ilo
t
Mounting the sensor
1. With the steering amidships, align the sensor as shown in the
relevant illustration below:
Single drive system with horizontal steering arm
Single drive system with vertical steering arm
2. Use the three self-tapping screws to attach the sensor directly to
the transom (or a fabricated mounting base).
3. Remove the pin securing the steering arm to the power steering.
4. Fit the Raymarine steering pin and retain with a split/cotter pin.
D1707-2
Parallel
Distance apart: 75 mm (3 in) min
310 mm (12.2 in) max
Rudder position
sensor
Sensor pin must
be
level
with
steering pin
Drive aperture
Raymarine steering pin
Steering arm
UP
D1692-2
Parallel
Distance apart: 75 mm (3 in) min
310 mm (12.2 in) max
Rudder position
sensor
Steering arm
Sensor pin and
steering linkage
must be at
same height
Power
steering
UP
Summary of Contents for SportPilot
