Raymarine SmartPilot SPX-10, Installation Instructions Manual

Page: 26 / 50

Clutch voltage switch
D10452-2
If the drive has a separate clutch connection to the course computer,
you must ensure that the clutch voltage switch is set correctly.
Note: The clutch voltage may be different from that of the drive
itself, for example the range of both 12 and 24 V Raymarine
drives all have a 12 V clutch.
Solenoid drive connection
G ROUND
P OWER S OLENOID S OLENOID
A B
12 V
24 V
D10456-2
1
2
3
4
5
1. Electronic steering / jog lever (if required)
2. Back-feed protection diodes (if using a electronic steering or
jog lever)
3. Drive out.
4. Drive return
5. Solenoid valves (with diodes across spool valves)
Care points:
• If an electronic steering or jog lever is used, fit diodes (suggested
type: 1N4004) in line with the solenoid outputs to prevent
back-feeding the course computer.
26 SPX SmartPilot installation instructions