2.
Course computer
— This is the central intelligence hub of the
autopilot system, linking the control head to the drive unit.
3.
Drive unit
— The drive unit interfaces with your boat’s steering
system.
4.
Fluxgate compass
— The fluxgate compass provides the
autopilot with a magnetic heading required for maintaining a
course.
5.
Rudder reference
— Required for some systems only. This
provides feedback from the rudder and can enhance steering
performance.
In addition the autopilot may receive data from other components,
for example:
•
Multifunction display
— The autopilot can connect to a
compatible multifunction display. This provides enhanced
capabilities for creating and following routes.
•
GPS
— Usually received from a multifunction display, the autopilot
uses position data when following routes and calculating the
optimum course to steer.
•
Wind transducer
— The autopilot can steer relative to a specified
wind angle.
Planning the installation
13
Summary of Contents for SmartPilot SPX-10
