Raymarine RS130 GPS, Installation Instructions Manual

Page: 23 / 40

3.2 SeaTalk ng connection overview
Use the supplied SeaTalk ng spur cable to connect the GPS receiver
to a SeaTalk ng backbone.
D 12021-1
4 3
1
2
1. SeaTalk ng GPS receiver.
2. SeaTalk ng spur cable.
3. SeaTalk ng T-piece. You can also use a 5-way connector block
instead of a T-piece.
4. SeaTalk ng backbone.
Note: A terminator must be fitted at each end of the SeaTalk ng
backbone.
3.3 SeaTalk ng connection overview —
long cable runs
Use the optional SeaTalk ng inline terminator to connect the GPS
receiver’s spur cable directly to the extreme end of the SeaTalk ng
backbone using the inline terminator. This removes the need for a
T-piece connector and a separate terminator, making it easier to
achieve a long cable run.
D 12022-1
4 3
1
2
1. SeaTalk ng GPS receiver.
2. SeaTalk ng spur cable.
3. SeaTalk ng inline terminator.
4. SeaTalk ng backbone.
Cables and connections 23