Raymarine RS130 GPS, Installation Instructions Manual

Page: 34 / 40

5.1 GPS receiver LED indications
The LED on the GPS receiver indicates status information for diagnostic purposes.
LED activity (based on 1000 ms (1 second) cycle) LED state description Status Description
Off Red Orange Green
1000 ms 0 ms 0 ms 0 ms Off No power.
900 ms 100 ms 0 ms 0 ms Short flash red Power supply outside nominal voltage range.
500 ms 500 ms 0 ms 0 ms Long flash red Unit is being upgraded or is unable to boot.
0 ms 500 ms 500 ms 0 ms Continuously alternating long flash red, long
flash orange Unit unable to communicate using SeaTalk ng .
0 ms 500 ms 0 ms 500 ms Continuously alternating Long flash red, long
flash green No GPS signal.
900 ms 0 ms 100 ms 0 ms Short flash orange No GPS fix.
900 ms 0 ms 0 ms 100 ms Short flash green Normal operation.
1 ms 333 ms 333 ms 333 ms Continuously alternating red, orange, green Unit is in test mode.
34 RS130 GPS Receiver – Installation instructions