Raymarine RS130 GPS, Installation Instructions Manual

Page: 19 / 40

4. Screw pack, consisting of:
• Studs (quantity: 2)
• Thumb nuts (quantity: 2)
• Screws (quantity: 2)
5. Flush mount gasket.
6. Mounting template.
Optional accessories
You may also require the following:
• SeaTalk ng inline terminator — useful for long cable runs. An
example scenario is a SeaTalk ng GPS receiver mounted on a
radar arch. In this example, you can run the backbone up the
arch and then connect the spur directly to the extreme end of the
backbone using the inline terminator. This removes the need for a
T-piece connector and a separate terminator, making it easier to
achieve a long cable run.
Planning the installation
19