Chapter 4: Menu Settings
37
To return to the previous menu level, select the [BACK] menu option or press the
CLR/WX
key.
To exit the Menu mode, press the
CLR/WX
key again or else press the
16/9
key to
switch to the priority channel in standby mode.
4.2 VHF Operations
This menu group controls basic radio functions. You access VHF Operations via
the
MENU
key.
Scan Mode
This function automatically searches through all channels in the set for any that
are broadcasting. If a transmission is received, the scan stops on the receiving
channel as long as it is present. If the signal is lost for five seconds, the radio
resumes scanning.
You can directly access the Scan Mode menu by pressing and releasing the
SCAN/
SAVE
key on the microphone. When a Scan Mode is active, you can terminate the
scan and return the radio to standby mode by pressing and releasing the key
again.
While scanning, press the microphone
CH
up/down keys or rotate the
CH/OK
knob on the transceiver to change the scan direction. UP (key)/clockwise (
CH
knob) increases the channel while DOWN (key) /counter-clockwise (
CH
knob)
decreases it.
D10128-1
SYS CONFIG
BACKLIGHT
CONTRAST
>KEY BEEP
D10129-1
MAIN MENU
>VHF OPS
GPS SETUP
SYS CONFIG
VHF OPS
>SCAN MODE
HI/LO POWER
SAVE CH
