Raymarine Ray49 Owner'S Handbook Manual Download

Page: 36 / 112

Ray49 Marine VHF Radio

3. Press in the

CH/OK

knob on the transceiver or

HI/LO

key on the microphone

to accept. The sub-menu headings are displayed.

4. Rotate the

CH/OK

knob on the transceiver or press the

up/down key on

the microphone to highlight the desired sub-menu.

5. Press

CH/OK

on the transceiver or the

HI/LO

key on microphone to accept.

The options under that sub-menu are displayed.

6. Rotate the

CH/OK

knob on the transceiver or press the

up/down key on

the microphone to highlight the desired option.

7. Press

CH/OK

on the transceiver or the

HI/LO

key on the microphone to

accept. The setting is changed. Continue in the same manner to make any
other setting changes.

D10124-1

SYS CONFIG
>BACKLIGHT
CONTRAST
KEY BEEP

D10125-1

SYS CONFIG
BACKLIGHT
CONTRAST
>KEY BEEP

D10126-1

KEY BEEP
>LOUD
QUIET
OFF

D10127-1

KEY BEEP
LOUD
>QUIET
OFF

Summary of Contents for Ray49

















































































































Search results

Summary of Contents for Ray49

Reviews:

Related manuals for Ray49

Brands by name

Popular brands

Raymarine Ray49, Owner'S Handbook Manual

Search results

Summary of Contents for Ray49

Reviews:

Related manuals for Ray49

Brands by name

Popular brands