background image

3-62

Operations

To go back by 1 digit, press the CLR key. If no nickname is to be registered,
press the ENT key for all characters so that they all display a  "–".

ENT

1-8

0

ENT

ENT

7/PQRS

2/ABC

ENT

ENT

ENT

To DELETE mode

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

If the maximum 20 stations are already 
registered, this display is shown and the 
radio shifts to Delete mode

Pressing ENT while "N" is displayed 
exits Menu mode without registering 
the station.

Pressing ENT while "Y" is displayed  
registers the station and exits Menu 
mode.

ENT

Input remainder 
of MMSI number

Input remainder 
of MMSI name

Note: 

The 

0

 key will enter only the numeral "0", while the 

1

 key will

alternately enter "1" and "space". The 

0

 and 

1

 keys do not have associated

alpha characters.

Deleting Shore Stations from the List

When the shore station phonebook is selected, the oldest MMSI number
or nickname flashes on the dot matrix display.

1. Press the SQ UP/DOWN key to scroll through the registered stations

until the station to be deleted is displayed.

2. Press the ENT key; the message DEL? Y is displayed.

3. Press the ENT key to process the deletion and exit the Menu operation.

Summary of Contents for Ray230



































































































































Reviews: