background image

3-61

Operations

Modifying the List of Shore Stations

In this operation, a shore (coast) station is added to or deleted from the
phonebook list.

1. When SHORE is displayed, press the ENT key. 

SHO

 appears on the 7-

segment display, while on the dot matrix display shows ENTRY.

2. The ENTRY selection is used to add an item to the list. Press the ENT

key to accept.
The list can hold a maximum of 20 entries. If a list is already full or if the
list becomes full during this process, operation returns to the EDIT
mode and the indicator PHNBOOK IS FULL is displayed.

3. To delete an item from the list, use the SQ UP/DOWN key to select

DELETE and press the ENT key. If no station has yet been registered,
the message PHNBOOK IS EMPTY is displayed.

          

ENT

Note:

  P

ressing and holding the CLR key for 3 seconds during either

ENTRY or DELETE returns operation to the mode before the Menu
operation began.

Adding Shore Stations to the List

To add to the phonebook list for shore stations, input the  MMSI number
and nickname of the station.

1. To enter the MMSI number, press the corresponding numeric keys

(0 through 9).  The currently selected location is indicated by a flashing
"–" character. Pressing a numeric key enters that value then advances
to the next digit's place. To go back by 1 digit, press the CLR key.

2. To enter the nickname, use the numeric keys (0 through 9) to input their

associated alpha or numeric value (refer to section 3.2 Controls and
LCD Display). The currently selected location is indicated by a flashing
"–" character. After inputting the desired letter or numeral, press the
ENT key to submit the entry and proceed to the next place.

3. When the message CONT? Y appears, press the ENT key to submit the

registration.

Summary of Contents for Ray230



































































































































Reviews: