manualshive.com logo in svg

Raymarine Ray230, Owner'S Handbook Manual

Share
Download
Raymarine Ray230 Owner'S Handbook Manual Download Page 115

5-6 Appendix

U.S. Coast Guard

Channel:

22A

Vessels:

Any

Use:

Working channel for
exchange of
communications with
stations of the U.S. Coast
Guard.

Between:

Ship to U.S. Coast Guard
ship, coast to aircraft
stations

Comments: U.S. Coast Guard does not

regularly monitor this
channel. Establish contact
on channel 16 and shift to
channel 22A as directed.

Navigation

Channel:

13

Vessels:

Any

Use:

Safety Communications
pertaining to the
maneuvering of vessels or
the directing of vessel
movements

Ship-to ship and secondarily ship-to-
coast

This is commonly called the Bridge-to-
Bridge channel. Large vessels and
towboats depend on this channel for
their safe navigation. Railway or
highway bridges which open for ship
navigation often operate on this
channel.

Bridge-to-Bridge stations must reduce
power to one watt for routine
operations.

Summary of Contents for Ray230



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands