manualshive.com logo in svg

Raymarine Ray230, Owner'S Handbook Manual

Share
Download
Raymarine Ray230 Owner'S Handbook Manual Download Page 74

3-51

Operations

12.  Siren 1 ("Hi-Lo" Sound)

Select this sound option under  Siren in the Menu operation. While in
Fog/Siren mode, pressing and holding the PTT switch emits a
continuous "Hi-Lo" sound from the Hailer Horn speaker at the selected
volume. Releasing PTT, the Hi-Lo sound stops.

13.  Siren 2 (Siren Sound)

Select this sound option under Siren in the Menu operation. While in
Fog/Siren mode, pressing and holding the PTT switch emits a
continuous siren sound from the Hailer Horn speaker at the selected
volume. Releasing PTT, the siren sound stops.

14.  Siren 3 (Whelp Sound)

Select this sound option under Fog Siren 1 in the Menu operation.
While in Fog/Siren mode, pressing and holding the PTT switch emits a
whooping or “whelp” sound from the Hailer Horn speaker at the selected
volume. When PTT is released, the whooping sound stops.

15.  Siren 4 (Air Horn)

Select this sound option under Fog Siren 1 in the Menu operation.
While in Fog/Siren mode, pressing and holding the PTT switch emits
an air horn sound from the Hailer Horn speaker at the selected volume.
When PTT is released, the air horn stops.

Summary of Contents for Ray230



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands