Raymarine Marine RADAR Operating Manual Download Page 5

?

More information...

See the 'General Operation' chapter of the Reference Manual. 

D6724_4

How do I insert a CompactFlash card?

Fit the card the correct way around.  DO NOT force.
Ensure card door is firmly closed at all times. 
DO NOT use a metallic instrument (e.g. screwdriver or pliers) to aid card removal.
Follow the correct procedure for removing a card (see below).
DO NOT remove card during either a read or write operation.

CAUTION

CompactFlash Card

In order to protect your E-Series Display and CompactFlash cards from irreparable 
damage, please adhere to the following:

... with the unit powered

Press 

MENU

. The Setup menu is displayed. 

Use trackpad (up/down) to highlight and then 
(right) to select CF CARD REMOVAL.  The system 
will now complete its checks. 

When instructed to do so, open the chart card 
door and remove the card. 

Firmly click the chart door shut and press 

OK  

twice.

... with the unit powered down

Open the chart card door.

Grip the card and pull to remove it from its slot.

Firmly click the chart card door shut.

How do I remove a CompactFlash card?

General Operation

Using CompactFlash cards

Card 4

Check that you are using the correct type of card. 
Raymarine recommend Navionics Chart cards or 
SANDISK CompactFlash cards.

Open the chart card door, located on the front left 
of the display. 

Insert the card as shown, with the lip of the card 
facing inwards. It should position easily. If it does 
not, DO NOT force it, check the direction in which 
the lip is facing. 

Gently press the card home and then firmly click 
the chart card door shut.

Narrow

Groove

Lip

1.

2.

3.

4.

1.

3.

1.

2.

3.

4.

2.

Summary of Contents for Marine RADAR



























Reviews: