Raymarine i60 wind, Installation And Operation Instructions Manual

Page: 34 / 70

6.1 Controls
Tack True/App Display VMG
D13138-1
1 2 3 4
1 Display / Power — Select to access Depth
information on the digital display, adjust
backlight, adjust contrast and power the
display On and Off
2 True / App — Switch between true and
apparent wind direction
3 VMG / Down — Display Velocity made good.
Use to move down through menu options or to
decrease numeric values
4 Tack / Up — Tack heading. Use to move up
through menu options or to increase numeric
values
6.2 Power
Powering on the unit
With power to the unit turned on but the unit switched
off:
1. Press and hold the
Power button until the unit
powers on and data is displayed (approximately
2 seconds).
Note: When power to the unit is turned on the unit
will switch on automatically.
Powering off the unit
1. Press and hold the Power button until the power
count down timer is displayed and reaches zero
(approximately 6 to 8 seconds).
Calibration alert
If the CAL legend on the digital display flashes for
the first 30 seconds after power up, refer to the
Calibration section to calibrate your unit.
34 i60