Raymarine i60 wind, Installation And Operation Instructions Manual

Page: 25 / 70

4 12 V dc positive (+)
5
In-line 5 A fuse
6
SeaTalk ng power cable
7
12 V dc negative (-)
8 Vessel’s RF ground
SeaTalk ng power protection
The power supply must be protected by a 5 A fuse
or a circuit breaker providing equivalent protection.
Raymarine recommends that the power is connected
to a SeaTalk
ng system in such a way that the current
drawn on each side of the power connection point
is equal.
SeaTalk ng power cables
Part number Description
A06049 SeaTalk ng power cable
4.3 SeaTalk ng connections
The unit has 2 x SeaTalk ng connectors on the rear for
connecting to a SeaTalk ng network.
D12056-1
Connecting SeaTalk ng cables
1. Rotate the locking collar on the back of the unit to
the UNLOCKED position.
2. Ensure the spur cable end connector is correctly
oriented.
3. Fully insert the cable connector.
4. Rotate locking collar clockwise (2 clicks) until it
snaps into the LOCKED position.
Cables and connections 25