Raymarine gS Series, Installation And Operation Instructions Manual, Page: 170 / 208

27.5 Display preferences
You can specify your preference for general display behavior.
Menu item Description Options
Starting page Allows you to select what page the display opens at start up. • Homescreen (default)
• Last page — After power up the last used page
is displayed.
• Choose page — After power up the page
selected is displayed.
Key Beep An audible sound can be made each time a button is pressed
or the touchscreen is used. • ON (default)
• OFF
Cursor Autohide If set to On, the cursor will be automatically hidden after a
period of no movement. If set to Off, the cursor will persist
on the screen until moved. • ON
• OFF (default)
Range Controls On New e Series and gS Series displays you can specify
whether the Chart, Radar and Weather application display
the onscreen range in and range out icons.
Note:
• Onscreen range controls are not available on
non-touchscreen displays.
• Onscreen range controls cannot be hidden on touch
only displays.
• Show (default)
• Hide
Context Menu (Touchscreen displays only) Determines how the context
menu is accessed using touch • Touch (default) — touching a chart object opens
the context menu.
• Hold — Touch and holding on a chart object
opens the context menu.
Pilot Control Bar Allows you to enable and disable the pilot bar on each display
individually, when connected to an SPX or SeaTalk autopilot.
Note: For evolution autopilots the Pilot Bar option is in
the Pilot Set-up page.
• Shown
• Hidden
Shared Brightness You can set up shared brightness groups (or “zones”) to
adjust the brightness on multiple units simultaneously. Share Brightness
• ON (default)
• OFF
Brightness Group
• Helm 1 (default)
• Helm 2
• Cockpit
• Flybridge
• Mast
• Group 1
• Group 2
• Group 3
• Group 4
• Group 5
Screenshot File Enables you to specify the default memory card slot for
screen capture images.
Note: This option is only available on displays with
multiple card reader slots.
• MicroSD 1
• MicroSD 2
Onscreen range controls
You can enable and disable onscreen range controls on New e
Series and gS Series displays by following the steps below.
From the homescreen:
1. Select Customize .
2. Select Display Preferences .
3. Select Range Controls .
Selecting Range Controls will switch between showing and
hiding the onscreen range controls.
304
gS Series