Raymarine gS Series, Installation And Operation Instructions Manual, Page: 142 / 208

19.1 Data application overview
The Data application enables you to view data generated by the
multifunction display or data that is available on your system.
Data can be obtained from devices connected using SeaTalk
hs ,
SeaTalk ng or NMEA protocols.
Pre-configured datapages
The default datapage configuration is dependant upon the boat
type selected during the initial set-up wizard.
Each datapage consists of a number of 'cells', that display the
information.
Default datapage configuration is shown below:
Motor vessel Sailing vessel
Page
number Page Page
number Page
1/6 Engine 1/5 Engine
2/6 Navigation 2/5 Navigation
3/6 Environment 3/5 Sailing
4/6 Fishing 4/5 Environment
5/6 Fuel 5/5 Rolling road
6/6 Rolling road
Note: Datapage selection is a local setting, and therefore only
affects the individual display that you are currently using. It
does not affect any networked displays.
Engine page
The Engine page is available for all boat types. The dials and
type of data displayed is dependent on the
Number of engines
set in the Boat Details settings.
Important: The relevant engine data must be available on
your network for the Engine page to show engine data.
Example — engine page for 2 engine vessel.
D13058-1
5
7
6
1 4 2 3
8 9 1 0 1 1 1 2
1. Port engine combined oil pressure and coolant temperature
dial
2. Total fuel
3. Engine Economy total
4. Starboard engine combined oil pressure and coolant
temperature dial
5. Port engine RPM dial
6. Starboard engine RPM dial
7. Trim tabs
8. SOG
9. Port alternator
10. Rudder bar
11. Starboard alternator
12. Depth
Navigation page
The Navigation page is available for all boat types.
D13062-1
5
6
7
8
1 4 2 3
1 0 1 1 9
1. Heading
2. Rolling road
3. Target waypoint
4. Waypoint ETA (Estimated time of arrival)
5. Heading to target waypoint
6. Distance to target waypoint
7. COG
8. SOG
9. VMG to waypoint
10. Rudder bar
11. Depth
Sailing page
When the boat type has been configured as a sailing vessel, the
Sailing page is available in the Data application.
The Sailing page includes compass and wind dials that displays
various data designed specifically for sailing vessel.
D13020-1
3
4
5
7
6
5
1 2
1. Compass dial
2. Wind dial
3. Waypoint icon — Only displayed during active navigation.
228
gS Series