background image

Chapter 5: Installation

5-3

5.2 Unpacking and Inspecting the Components

Unpack your Raynav 300 GPS Plotter carefully. Retain the carton and 
packing materials in the event that you need to return the unit for service:

System Parts and Accessories

Items Missing?

If any one (or more) of the above items is missing or damaged, please 
contact your Raymarine dealer or our Product Support Department to 
obtain replacement parts. 

Please note that missing or damaged items 

cannot be replaced without proof of purchase.

Registering this Product

When you have checked that you have all of the listed components, 
please take the time to complete the pre-paid warranty registration card. 
This ensures that the appropriate warranty conditions will apply.

Item

Part No.

Supplied with

RN300 System

E32017

Sun Cover

E35008

All

Active Antenna

E35009

All

Trunnion Mount Kit

E35011

All

Power Cable

R38024

All

TNC Coaxial Extension Cable 10m

E36011

Optional

Panel Mount Kit

R38061

Optional

Handbook

81171

All

Quick Reference Card

86053

All

81171_4.BOOK  Page 3  Thursday, November 29, 2001  11:34 AM

Summary of Contents for GPS Plotter




































































































































Reviews: