Raymarine GPS Plotter, Owner'S Handbook Manual

Page: 54 / 131

Chapter 3: Operation 3-25
Saving the Current Route
You can save up to 20 named routes in the Route Database List. These
routes can then be re-displayed and followed at a later date. When you
save the route, all new waypoints are saved in the Waypoint List.
Note: When a change to this route is attempted, eg.
CLEAR ROUTE
and the
current route has not been saved, you are prompted to save it.
➤
To save and name the current route:
1. Press the
ROUTE
soft key followed by
MORE
to access the
SAVE ROUTE
soft key.
2. Press the
SAVE ROUTE
soft key. The Save Route List and the
NAME
ROUTE
soft keys are displayed as shown in Figure 3-31 with the next
available entry on the Route List highlighted.
Figure 3-31: Save Route Soft Keys
Note: The trackpad up/down can be used to select another position in the
list; this can be an empty position or an existing route that you no longer
require.
3. If you do not wish to name or re-name the route, press the
NO
soft key
to clear the list. The route is saved and is listed as
ROUTE NOT NAMED
.
4. To name the route press the
YES
soft key. Use the trackpad to move the
cursor right or left to the character you wish to edit. Then use the top
or bottom of the trackpad to increase or decrease the letter or number.
5. Press
ENTER
to finish and clear the Name List, or press
CLEAR
to
cancel the operation. To return to the default soft key display, press
ENTER
again.
SAVE ROUTE
CURRENT
1 ALDERNEY-SOLENT
2 COWES-PORTSMOUTH
3 BRAYE-CHERBOURG
4 HOME TO COWES
5 NO NAME
YES NO
NAME ROUTE?
D4911-1
81171_4.BOOK Page 25 Thursday, November 29, 2001 11:34 AM